Petrol 2 Inch High Pressure Fire Fighting Pump 7HP THORNADO

Rated 4/5 based on 4 reviews.
$299.00
RRP $635.58
SAVE $336.58 (53%)
In Stock
Usually Ships in 24 Hours


Calculate Shipping

THORNADO 2 Inch 7HP (212cc) Fire Fighter Pump Twin Impeller


Fire fighting pumps can mean the difference between a total loss of property, or a fire spreading to larger areas, or even life and death. If all the above are important to you, then you want to make sure and buy high quality, dependable fire fighter pumps from reputable name brands you can trust.


The New THORNADO 2 inch fire fighting pump has landed in Australia and is already becoming the most popular high pressure water pump solution because of its durability and outstanding performance. It can be used for any pumping jobs from firefighting, pumping out a flooded cellar, heavy duty cleaning, running farm sprinklers or even just everyday water relocation such as filling a swimming pool.


This THORNADO 2 inch fire fighting pump is not only featured with a suction inlet of 50mm or 2 inch BUT also comes with Three discharges outlets of 2 inch & 1.5 inch, performing a maximum water displacement rate of 18,000 litres per hour and the ability to draw up to 7m in height. With its twin impeller, this pump provides a strong delivery lift up to 85m.


The Thornado 2 inch fire fighting pump is powered with a thornado 7HP petrol engine, 4-stroke, single cylinder Overhead Valve (OHV) design for increased efficiency and optimal power transfer while lower fuel consumption. A precision metal camshaft and forged crankshaft design supported by ball bearing makes the Thornado engine more durable and reliable as compare to low quality engine that using plastic camshaft. The engine is installed with an automatic low oil alert shut off system to prevent the engine damage from insufficient oil. Furthermore, the automatic mechanical decompression system will give you easier starter and get the equipment running on task. With a 3.6L fuel tank, this water pump is ready for up to 2.6 hours at 3/4 load capacity.


Highly efficient, the Thornado 2 inch fire fighting pump has multiple uses because of its small size, its light weight, and its portability. The Thornado 2 inch fire fighting pump seems to be the perfect solution using in variety of locations including fire fighting, water plants, mines, factories, ships, and villages where water needs to be drained remotely, the THORNADO 2 inch fire fighting pump is an ideal solution not only for emergency jobs but also for daily routine.
 

Features

  • Powered by Thornado 7HP 4 Stroke OHV Petrol Engine
  • Solid pump - Weight 29 Kg. Others are only 23 Kg.
  • Twin Impeller design provides the versatility of high flow with strong pressure
  • Rigid mounted cast iron volute and heavy duty full frame protection
  • Big pump body for better priming capability
  • Pump casing and impellers manufactured from quality corrosion resistant marine grade aluminium for long life
  • 3 ways discharge ports for easy installation with a choice for plumbing sizes
  • Powder coated pump casing for added corrosion protection
  • Toughened and durable hose fittings for corrosion resistance
  • Low oil protection installed to prevent engine damage by automatically shutting the engine down when oil drop below the safe operating level
  • 12 Months Australia Warranty

 

Suitable Applications

  • Fire Fighting
  • High lift or long distance water transfer
  • Water transfer from dam
  • Tank filling
  • Irrigation
  • Sprinkler
  • Washing
  • Shallow Well
  • Water Carts
  • Fish Farm
  • Crop spraying

(TH-WP2HP20A)

>

Model No TH-WP2HP20A
Type Self priming, Centrifugal pump
Inlet Size 2 inch (50mm)
Outlet Size 1x 2 inch (50mm) & 2x 1.5 inch (40mm)
Max Lift Head 80m
Max Flow 18,000 litres/hour
Max Suction Depth 7m
Max Pressure 114 PSI
Material Alluminium alloy housing, alluminium impeller
Engine TH-070PR / TH-070SR (7HP)
Engine Type 4 stroke, air cooled
Max Power HP / Rpm 7HP / 3600 Rpm
Displacement 212cc
Fuel Type Petrol
Oil Type SAE10w-30 / SAE30
Fuel Tank Capacity 3.6L
Oil Capacity 0.6L
Run Time Full Tank 2h at ?? load
Starting System Recoil manual start
Product Length 510mm
Product Width 450mm
Product Height 430mm
Product Weight 29kg
In the Box Hose fittings, hose clamps, intake strainer, spark plug wrench, user manual, 

 

 

 

SKU TH-WP2HP20A
Brand Thornado
Shipping Weight 28.0000kg
Shipping Width 0.410m
Shipping Height 0.490m
Shipping Length 0.420m
Shipping Cubic 0.084378m3
Unit Of Measure Unit

WARRANTY

The warranty is provided by THORNADO (ABN: 83 146 014 324) ("The Company") for the customer sole benefit. To be eligible to make a claim under this warranty, customer must retain the purchase receipt. The warranty applies only to the original retail purchaser. The company guarantees to the buyer that the equipment will be free from defects caused by faulty materials or poor workmanship for a period no longer than twelve months from the date of delivery.

Warranty Period

The warranty period for the Thornado equipment is 12 months commences on the date of sale of the equipment. 

As far as law permits, the Warranty Period will not be extended, renewed, or transferable with subsequent resale, repair or replacement of the item. Repaired parts will be warranted for the remainder of the original Warranty Period, or for the thirty (30 days) from the date of repair, whichever is longer.

Please click here for more detail about our warranty. 

 

Water pump

By: on 29 April 2017
The delivery was great when I got the product the choke was not connected so it took me a long to figure out why it wasn't starting being in the bush it was very far for me to get it fixed so might be something to check when purchasing I got it fixed all go now
(2)

Excellent Pump

By: on 7 March 2017
This pump was a replacement for an identical pump that was destroyed in the recent Carwoola bushfire. It's job was to supply water from our dam to a dedicated fire tank for firefighting distribution. It did it's job well and contributed towards our houses being saved. Unfortunately when the fire reached our dam area, it took the pump out, but after it had done it's job. It's a good product and excellent value for money.
(5)

Thornado firefighting pump

By: on 29 November 2016
the Chonda motor ( Chinese Honda) started first pull.....but remember to add oil to the crank case. Other pumps have a NO OIL warning on the dip stick plug. The ring & tail & clamp supplied were not up to the task of sealing the suction hose i used ( 2 inch poly agric. pipe) so i bought a proper ag. pipe joiner ( male to pipe; female to pump inlet thread). Was a bit disappointed in the self prime capacity of the pump itself...seemed to take ages even with a foot valve installed, suction line filled with water and less than a 2m lift. But once it started pumping, the flow rate was excellent. I look forward to years of reliable service pumping from a farm dam to buffer tank located over 35m above dam level.
(4)

Purchase and initial use of a Thornado 2 inch 7 HP

By: on 14 September 2016
Recently I needed to replace the engine on my fire fighter pump that is used to fill a tank that supplies our house with gravity supplied pressure that negates the need for a house level pressure pump. I settled on an alternative option which was to get a whole new engine & pump unit. My friendly mower mechanic speaks well of the Chinese made version of a Honda engine and being a strong believer in the theory that 'a dollar saved is a dollar earned' I went in search of a 'Chonda' unit. There are several different brands on the market with prices for very similar performance spec's varying between $240 - $300. Being reluctant to buy without making phone contact I phoned a Victorian based Company to ascertain the availability of spares, back-up and etcetera and found myself talking to some fellow in the Phillipines. It was possible to understand him but getting clear straight answers became 'mission impossible' - the little he did tell me was confusing and still did not establish a certainty of spare parts supply. With a big X next to that supplier I rang Thornado at their Chipping Norton number and got to speak to a very knowledgeable fellow, at that site, who readily answered all the questions and even supplied good info on how best to run the engine in to ensure a long and productive life. The next morning I rang back to order the unit, and the records show that it was despatched from their warehouse on that same day. Before finalising the plumbing of the unit the engine sump was allowed to drain then filled prior to removing the spark plug and putting a dash of engine oil on top of the piston and then using the starter cord to wind it over 50-60 times. Next day when the plumbing was done and testing was in order the 'Chonda' Thornado fired on the 1st pull of the cord. Once the priming was done the the unit with the extra 1.5 HP and twin impeller pump handled the workload so easily that I'm finding it difficult to tell whether it is actually pumping or not. Only 1 non-positive comment can to be made and that is that the 10mm nut used to clamp the speed control lever needs to loosened by about 1 turn to make it more user friendly. In summary I'm extremely happy with the unit and the Thornado Co and would recommend them to friend and foe alike.
(5)

Write a product review


We Also Recommend



You May Also Like



Others Also Bought



More From This Category